The REDARC RedVision is commonly known as a Total Vehicle Management System or TVMS. We’ll dive into the details next, but in short RedVision controls, and displays information from, the huge array of electrical devices to which it can be connected.
In the box are the display and an impressive distribution and fuse box. Also part of the system is the REDARC RedVision app which is available for download for iOS and Android.
We installed a pre-release REDARC RedVision into our new LandCruiser to see how it works. We have just returned from a few weeks in Central Australia and the Simpson Desert which was a good test of both its reliability and everyday usability.
What Can REDARC RedVision Control?
While every camper, caravan and vehicle is different, we’ve got quite a bit of electrical gear connected to our RedVision, so it should give you an idea of the type of equipment it can operate:
- REDARC Manager 30 – battery charger (vehicle, solar or 240V)
- RV Lithium Systems 180Ah Battery
- REDARC 1500W Pure Sine Wave Inverter (240V)
- Long Ranger underbody water tank – pump and gauge
- Behind drawer water tank – pump and gauge
- Temperature probes – in the vehicle and in fridge
- ARB Twin Compressor
- ICOM UHF radio, iPhone and iPad
- USB sockets in front and rear
- Lights in electrical locker, recovery gear/tool locker and boot
- Fridge
We could easily power on and off to everything using REDARC RedVision’s hard-wired display or the app. Both are intuitive to use and have large easy to read colour displays. We tended to use the app to monitor our battery and check things were switched off while driving and up in our rooftop tent.
At a glance, we could check the charge of our battery and the level of our water tanks. We could then flick on our water pumps and get coffee on the way and our water bottles topped up.
Customisation
It’s possible to program each REDARC RedVision with custom logic. We programmed our rear locker and boot interior lights to switch off automatically when we start the engine. Similar logic can be applied to water pumps and other accessories.
Our tyre compressor is mounted in the rear. Connecting this to the RedVision meant we could control it over Bluetooth in the cabin using the RedVision App with no need for any extra wiring to the front or switch.
Power Information
When paired with a REDARC Manager 30 or Manager 15 RedVision can display historic battery usage and charging information. This made it really easy for us to see how much power we were consuming at different times and how quickly our battery charged while driving and in different conditions from solar.
The REDARC RedVision is available as a factory-fitted option from select camper trailer and caravan manufacturers as well as separately for installation in camper trailers, caravans, wagons, ute canopy or Troopy builds.
For more details visit redarcelectronics.com.